Ist National Conference on Advances in Mechanical Engineering - 2019

Add to watchlist Add to Google Calendar

Location: Delhi, India
Begin: March 16, 2019
Keywords: mechanical engieering, material sciences, manufacturing engineering, instrumentation engineering
Submission Deadline: December 10, 2018
Abbreviation: NCAME - 2019

It gives me immense pleasure to share with you that National Institute of Technology Delhi (NITD) (an autonomous institute under the aegis of MHRD, Govt of India and an institute of national importance) is organizing its First National Conference on Advances in Mechanical Engineering (NCAME) - 2019 on March 16, 2019.  

The conference aims to discuss different areas of mechanical engineering from design to manufacturing. It attempts to report the recent developments in aforementioned areas by providing a fascinating overview of the state of the art in the field in India, which will be of interest to a wide readership. A broad range of topics and issues in modern engineering will be discussed including (but not limited to) CAD/CAM, additive manufacturing, materials science and engineering, simulation and modeling, finite element analysis, applied mechanics etc. 

NCAME - 2019 proceedings consisting of peer reviewed papers will be published in Advanced Science Letters (an American Scientific Publishers publication, USA, and selected papers as proceeding may be published in Lecture Notes in Mechanical Engineering (a Springer publication,, confirmation awaited), Advanced Engineering Forum (a Trans Tech Publications Inc, Switzerland,; Discussion inderway). 

In addition, few articles will be invited for submission of extended version for consideration for publication in the journal FME Transactions (ECSI indexed). Organizers are planning to have publication of special issues from the recommended articles of the conference after extension and peer review in different SCI / ESCI indexed journals as per journal requirements.


Submission Guidelines

All papers must be original and not simultaneously submitted to another journal or conference. The following paper categories are welcome:

  • Full papers describing recent developments in the areas of Mechanical Engineering and Allied Engineering including Instrumentation are welcome for oral presentation and poster presentation. The papers submitted need to be atleast 2500 words and will be subjected to peer review, plagiarism / quality checks and registration by atleast one of the authors before inclusion in the conference proceeding. 

  • The manuscript should be written in Times New Roman Font (size 12) and single line spacing with suitable citation of figures and tables along with References. Margin of the paper may be set 2.54 cm on each side. Author's name, affiliation and E-mail need to be mentioned clearly. 

  • Peer reviewed manuscripts need to be formatted as per journal style depending upon the recommendation of the conference committee. 

  • The organizers have collaboration with several international journals for publication of conference proceeding as a special issue. 

  • Decision of the organizers will be final and binding.

Elements of the Manuscripts


        a. A cover sheet consists of a short title, name, affiliation and address of all authors. 

        b. Manuscript must start from the next page with title on top of the page. 

       c. An abstract of about 100-200 words should be provided on the title page. 

       d. This should be readable without reference to the article and should indicate the scope of the contribution, including the main conclusions. 

       e. An introduction, which may begin with what is new in the paper, not with statement that is well known to everyone. 

       f. Appropriate section of the text. 

       g. A conclusion. 

       h. An acknowledgement (optional). 

       i. A list of references in proper format.     

       j. A
 set of original figures and tables. 

       k. A list of captions for all fi gures and title for all tables. 

       l. References: References must be prepared in proper format (examples of various types are given below) and numbered consecutively in the order in which they are cited in the text. 

          Books: Authors name, title of the book, publisher, year, pp. first and last page no. 

          Periodicals: Author(s) name, title of article, name of journal, vol. no.(year), pp. first and last page no. Example: [1] G. B. Gao and X. Gui, Reliability Physics as a new discipline, Microelectron.                    Reliab., 28(1988) 713–720. 

          Conference records: Author(s) name, title of article, name of conference, place where held(year), pp. first and last page no. 

          Unpublished conference presentations: Author(s) name, title of article, name of conference, place where held, year. 

          Technical reports: Author(s) name, title of article, report no., published by, year


List of Topics (but not limited to)

  • Artificial intelligence applied, optimization methods

  • Automation and control

  • Composites, ceramics, polymers / processing

  • Computational mechanics / FEM modelling and simulation

  • Computer-based manufacturing technologies: CNC, CAD, CAM, FMS, CIM

  • Design and manufacture, medical device manufacturing

  • Friction and wear of materials, corrosion resistance

  • Heat treatments, microstructure and materials properties

  • Instrumentation and measurement

  • Joining and fracture mechanics

  • Lubricants and lubrication

  • Machinability and formability of materials

  • Finite Element Analysis 

  • Fluid Mechanics, Combustion, and Engineering Physics

  • Heat and Mass Transfer

  • Instrumentation and Control Engineering

  • Laser Material Interactions

  • Machine Design and Analysis

  • Materials and Failure Analysis

  • Materials Synthesis and Processing

  • Operations Research

  • Production Planning and Control

  • Project Management

  • Quality Control and Management

  • Reliability and Maintenance Engineering

  • Safety, Security and Risk Management

  • Service Innovation and Management

  • Supply Chain Management

  • Decision Making

  • Systems Modeling and Simulation

  • Technology and Knowledge Management

  • Rapid manufacturing technologies and prototyping, remanufacturing

  • Recycling, materials and industrial wastes, products and recycling systems

  • Renewable energies technology

  • Solid mechanics and structural mechanics

  • Sustainable and green manufacturing

  • Thermodynamics and heat transfer

  • Tribology and surface engineering

  • Vibration and acoustics

  • Automobile Engineering

  • Applied Mechanics

  • Human Vibration

  • Ergonomics

  • Nuclear Engineering

  • Biomechanics

  • Biomedical Instrumentation

  • Mathematical Modelling

  • Optimization Techniques

  • Nanotechnology

  • Sensors and Transducers

  • Metrology

  • Uncertainty of measurement

  • Other research related to Mechanical Engineering etc. 

Registration Details

Registration Fee:

  • Industry Expert / R&D                                                                                   Rs. 5000

  • Faculty                                                                                                            Rs. 4000

  • Research Scholar                                                                                            Rs. 3000

  • Student (UG/PG)                                                                                            Rs. 2500

  • Participant (Without Paper)                                                                            Rs. 2000

  • Additional paper (R&D, Faculty)                                                                   Rs. 3000

  • Additional Paper (Research scholar / UG-PG student)                                  Rs. 2000 

 Payment of Registration Fee:

a.         Demand Draft:  

in favour of “Director, NIT Delhi Endowment fund” Payable at New Delhi.

b.         NEFT:  

A/c No: 2938101008010; IFSC: CNRB0002983; Beneficiary: Director, NIT Delhi Endowment Fund; Bank: Canara Bank

Important Dates:

a.         Date of submission starts:                                                             08.11.2018

b.         date of submission ends:                                                               10.12.2018

c.         Reviews of paper:                                                                           25.12.2018

d.         Revised and CRC paper:                                                              10.01.2019

e.         Date of submission of copyright:                                                  15.01.2019

f.          Last date of Registration fee payment:                                       15.01.2019


National Advisory Committee

  • Sh. Sushil Kumar, National Institute of Technology Delhi

  • Dr. Vivek Shrivastava, National Institute of Technology Delhi

  • Prof. Pradeep Kumar, Indian Institute of Technology Roorkee

  • Prof. B P Patel, Indian Institute of Technology Delhi

  • Prof. A K Darpe, Indian Institute of Technology Delhi

  • Prof. N Sahoo, Indian Institute of Technology Guwahati

Organizing committee

  • Prof. Praveen Kumar, Hon. Director, National Institute of Technology Delhi

  • Dr. Harish Kumar, National Institute of Technology Delhi

  • Dr. V S Pandey, National Institute of Technology Delhi

  • Dr. D Vaithiyanathan, National Institute of Technology Delhi

  • Dr. Shrutidhara Sarma, National Institute of Technology Delhi

  • Dr. Abhishek Mishra, National Institute of Technology Delhi

  • Dr. Servesh Agnihotri, National Institute of Technology Delhi


The conference will be held in National Institute of Technology Delhi.


All questions about submissions and conference should be emailed to 

Dr. Harish Kumar,

Department of Mechanical Engineering, National Institute of Technology Delhi, India


Related Calls

  • 2019 7th International Conference on Nano and Materials Science

    2019 7th International Conference on Nano and Materials Science
    Topic: Materials science
    Location: Francisco , United States
    Begin: January 4, 2019
    Deadline: October 30, 2018

    ICNMS 2019 is organized by the South Asia Institute of Science and Engineering (SAISE). ICNMS 2019 is expected to be more exciting, stimulating & educative. The intention is to establish an effect...

  • 2019 International Workshop on Materials and Design

    2019 International Workshop on Materials and Design
    Topic: Materials science
    Location: Oxford , UK
    Begin: March 29, 2019
    Deadline: November 5, 2018

    2019 International Workshop on Materials and Design (MatDes 2019) will be held in Oxford, United Kingdom on March 29-April 1, 2019 and it will be run alongside ICKEM 2019. Modern engineered materials ...

  • 2019 10th International Conference on Material and Manufacturing Technology

    2019 10th International Conference on Material and Manufacturing Technology
    Topic: Materials science
    Location: Kuala Lumpur , Malaysia
    Begin: April 26, 2019
    Deadline: December 1, 2018

    You are sincerely invited to take part in 2019 10th International Conference on Material and Manufacturing Technology (ICMMT 2019) in Kuala Lumpur, Malaysia during April 26-28, 2019. With the past suc...


Share by email Share on Facebook Share on Twitter Share on Google+ Share on LinkedIn Pin on Pinterest

Ask your question about this call